ICS 03 . 220 .30s9 3T B中 华 人 民 共 和 国 铁 道 行 业 标 准TB/ T 3096-2004铁道货车超偏载检测装置Detecting Device for Overload and Unbalance Load of Rail Wagons2004-04-22 发布2004-1 1-01 实施中 华 少L 民 共 和 国 铁 道 部发布T B/ T 3096-2004目次前言 ·. I1范围 · 12规范性引用文件 ····· ······················· ············ ····················· ···· ··························⋯⋯ 13术语和定义·························································· ···· ························· · ·········⋯⋯ 14基本要求 ·····························································，··········································⋯⋯15技术条件 ·················································· ······ ···············································⋯⋯ 26试验方法 ······································ · 。··························· · ······ ··························⋯⋯ 37检验规则 · ···，·························································································，·········⋯⋯ 58标志、包装、运输、贮存······················ ···································································⋯⋯ 6附录A(资料性附录)超偏载测试数据统计方法·············· ···· ······························· ········⋯⋯ 7附录B(资料性附录)检衡车硅码分布尺寸图·········································，·····················⋯⋯ 9TB / T 3096-2004前言 本标准在分度值、最大允许误差等方面参照了国际法制计量组织(OIML)国际建议R106- 1“自动轨道衡”。 本标准由铁道部标准计量研究所提出。 本标准由铁道部标准计量研究所归口。 本标准起草单位:国家轨道衡计量站、柳州铁路局科研所、北京华横新技术开发公司、成都货安计量技术中心、北京东方瑞威科技发展有限公司。 本标准主要起草人:张一兵、陆 霖、何小菊、王行方、徐海贤、李世林、孙熊岳、高占。 本标准为首次发布。TR / T 30 96 -20 04铁道货车超偏载检测装置1范围 本标准规定了铁道货车超偏载检测装置(以下简称“检测装置，’) 的术语和定义、基本要求、技术条件、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于检测装置的制造、安装和试验。2规范性引用文件 下列文件中的条款通过本标准的引用而成为本标准条款。凡是注日期的引用文件，其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分，然而，鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是.
